BSXDC - SUNPROOF LATEX H/P RUSTIC BASE, 72-300

  • MSDS: BSXDC
  • Manufacturer: PPG INDUSTRIES INC
  • Product Name: SUNPROOF LATEX H/P RUSTIC BASE, 72-300
  • National Stock Number: 8010-00N012507
Product Identification

Product ID:SUNPROOF LATEX H/P RUSTIC BASE, 72-300
MSDS Date:12/06/1989
FSC:8010
NIIN:00N012507
MSDS Number: BSXDC

Responsible Party
PPG INDUSTRIES INC
260 KAPPA DRIVE
PITTSBURGH, PA 15238
US

Emergency Phone: 304-843-1300

Info Phone: 412-963-5822

Cage: DO542

Contractor
PPG/PITTSBURGH, OA 15238
9 ALLISON PARK, PA 15101

Telephone: 412-492-5555

Cage: 53171

Ingredients

KIDNEY & LIVER DMG WHICH HAS BEEN SHOWN TO CAUSE

RTECS: 9999999ZZ


REDNESS, ITCHING, BURNING SENS & VISUAL

RTECS: 9999999ZZ


ITCHING, BURNING, REDNESS, & SWELLING ARE CONDITIONS

RTECS: 9999999ZZ


EXPOSURE TO A CORROSIVE MATERIAL.

RTECS: 9999999ZZ


BELOW THE LOWEST SUGGESTED EXPOSURE LIMITS, THE LEL

RTECS: 9999999ZZ


TO REMOVE DECOMPOSITION PRODUCTS DURING WELDING OR

RTECS: 9999999ZZ


ANTICIPATED TO BE CARCINOGEN.

RTECS: 9999999ZZ


SILICA, CRYSTALLINE - FUSED

CAS: 60676-86-0

RTECS: VV7328000

Fraction By Weight: 2-5%

OSHA PEL 0.1 MG/M3 RDUST

ACGIH TLV: 0.1 MG/M3 RDUST


SILICA, CRYSTALLINE - QUARTZ (MICRO CRYSTALLINE SILICA

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 20-25%

OSHA PEL 0.1 MG/M3 RDUST

ACGIH TLV: 0.1 MG/M3 RDUST


ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 1-2%

OSHA PEL 50 PPM, C

ACGIH TLV: 50 PPM VAP/MIST, C

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


PROPIONIC ACID, 2-METHYL- MONOESTER

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: 1-2%

OSHA PEL N/K

ACGIH TLV: N/K


WATER; (DEIONIZED WATER)

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 50-55%

OSHA PEL N/K

ACGIH TLV: N/K


FILM FORMERS, RESINS, AND ADDITIVES

Fraction By Weight: 15-20%

OSHA PEL N/K

ACGIH TLV: N/K


SILICA, CRYSTALLINE - CRISTOBALITE

CAS: 14464-46-1

RTECS: VV7325000

Fraction By Weight: 2-5%

OSHA PEL 0.05 MG/M3 RDUST

ACGIH TLV: 0.05 MG/M3 RDUST

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INGEST:HARMFUL/FATAL IF SWALLOWED.
EYE:CAUSES EYE IRRIT. SKIN:MAY CAUSE SLIGHT SKIN IRRIT. INHAL:VAP &
SPRAY MIST MAY BE HARMFUL IF INHALED. SANDING DUSTS MAY BE HARMFUL
IF INHALED. VAP GENERATED AT E LEVATED TEMPS IRRIT EYES, NOSE &
THROAT. CHRONIC:AVOID LONG-TERM RPTD EXPOSURE. THIS PROD CNTNS A
FORM (EFTS OF OVEREXP)
Explanation of Carcinogenicity:CRYSTALLINE SILICA:IARC MONOGRAPHS,
SUPPLEMENT. VOL 7, PG 341, 1987: GRP 2A. NTP 7TH ANNUAL REPORT ON
CARCIN, (ING 14)
Effects of Overexposure:HLTH HAZ:OF CRYSTALLINE SILICA WHICH IARC ASSOC
W/AN INCR RISK OF CANCER IN LAB ANIMALS. LONG-TERM EXPOS TO
CRYSTALLINE SILICA MAY ALSO LEAD TO A DISABLING INJURY KNOWN AS
SILICOSIS. THESE EFTS ARE AS SOC W/BRTHG EXCESS AMTS OF SILICA
DUST.APPLIC OF THIS PROD IS NOT EXPECTED TO GENERATE EXCESS AMTS OF
RESP (SUPP DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INGEST: DO NOT INDUCE VOMIT. EYE: FLUSH IMMED W/PLENTY OF
WATER FOR @ LST 15 MIN. SKIN: FLUSH IMMED W/PLENTY OF WATER
FOLLOWED BY WASHING W/SOAP & WATER. INHAL: REMOVE TO FRESH AIR.
APPLY ARTF RESP & OTHER SUPPORTIVE MEASURES AS REQUIRED. OTHER:IF
ANY OF THE FOLLOWING OCCUR DURING/FOLLOWING USE OF PROD, CNTCT A
POIS CTL CTR, EMER ROOM/MD; HAVE MSDS INFORMATION AVAIL. INGEST,
EXCESS (ING 11)

Fire Fighting

Flash Point Method:PMCC
Extinguishing Media:USE NFPA CLASS B EXTING (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING (SUPP
DATA)
Fire Fighting Procedures:WATER SPRAY MAY BE INEFTIVE. WATER SPRAY MAY
BE USED TO COOL CLSD CNTNRS TO PVNT PRESS BUILD-UP & POSS
AUTOIGNIT/EXPLO WHEN EXPOSED TO EXTREME HEAT.(SUPP DATA)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE OR BURST
(DUE TO THE BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME
HEAT.

Accidental Release

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERSONNEL EQUIPPED
W/PROPER RESP & SKIN & EYE PROT SHLD BE PERRMITTED IN AREA. REMOVE
ALL SOURES OF IGNITION. TAKE UP SPILLED MATERIAL W/SAWDUST,
VERMICULITE, OR OTHER ABSORBENT MATERIAL & PLACE INTO CNTNRS FOR
DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QTYS IN BUILDING DESIGNED AND PROTECTED FOR STORAGE OF NFPA IIIB
LIQUIDS. PROTECT FROM FREEZING.
Other Precautions:IF THIS MATERIAL IS PART OF A MULTIPLE COMPONENT
COATING SYSTEM, READ THE MSDS(S) FOR THE OTHER COMPONENT(S) BEFORE
BLENDING AS THE RESULTING MIXTURE MAY HAVE THE HAZARDS OF ALL OF
ITS PARTS.

Exposure Controls

Respiratory Protection:WHERE VENTILATION IS INADEQUATE, USE A SUITABLE
NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:PROVIDE GENERAL DILUTION OR LOC EXHAUST VENT IN VOL &
PATTERN TO KEEP THE CONC OF INGRED LISTED IN INGRED SECT (ING 12)
Protective Gloves:NITRILE/NEOPRENE/LATEX GLOVES.
Eye Protection:CHEMICAL SAFETY GOGGLES .
Other Protective Equipment:WEAR PROT CLTHG, INCL IMPERMEABLE APRON
CONSTRUCTED OF NITRILE/NEOPRENE/LATEX.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING & SHOES.
Supplemental Safety and Health
EXTING MEDIA: NFPA CLASS IIIB LIQUID FIRES. FIRE FIGHT PROC: IF WATER
IS USED, FOG NOZZLES ARE PREFERALE. FIRE-FIGHTERS SHOULD WEAR
NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT . EFTS OF
OVEREXP: SILICA, SO THE POTENTIAL HAZ FOR HUMANS IS LIMITED. THIS
PROD CNTNS ETHYLENE GLYCOL WHICH MAY CAUSE (ING 8)

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:17.
Vapor Density:HVR/AIR
Spec Gravity:1.22
Evaporation Rate & Reference:33 (BUOAC=100)
Solubility in Water:53.7%
Appearance and Odor:VISCOUS LIQ W/ODOR CHARAC OF THE CHEMICAL FAMILY
&ANY SOLV LISTED IN ING SECT.
Percent Volatiles by Volume:65.60

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE HAZ DECOMP PRODS WHEN
HEATED. WELD/BRAZE/FLAME-CUT ON SURF COATED W/PROD MAY PRODUCE
CARBON MONOXIDE.

Disposal

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL, AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WA STE FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.